How To Replace Laptop

Getting a laptop LCD replacement should not be difficult. You can scour the market for laptops that are not functioning anymore but with an LCD that is still intact. Or better yet, go to the manufacturer for a brand new laptop LCD replacement. The advantage of getting a replacement from the manufacturer is that they usually give instructional materials. And you can have them attach the new LCD for a lower service fee. But there is also the good old do-it-yourself laptop LCD replacement.

The following instructions should be most helpful if you choose to salvage an LCD from an old laptop for your laptop LCD replacement. It should be a quick process. But you have to take extra care. There are delicate parts that you should handle with care, lest you end up creating even more damage that you started with. Without further ado, here are the steps you have to take for a do-it-yourself laptop LCD replacement:

First step. Release the battery and the power cable. You need bits that are of the right size. A jeweler's bits will be most handy.

Second step. Remove the rubber grommets around the bezel. Again, make sure that you are using the right bits.

Third step. It's time to work on the bezels. This is one of the delicate parts I was talking about. Be extra careful. These bezels are made of thin plastics that easily break. More so, they automatically snap making it difficult to unsnap them.

Fourth step. Remove the metal frame positioned at the laptop's top lid. Before you can do this, you have to release 14 screws.

Fifth step. Remove the broken LCD. Simply lower the LCD to a resting position so you can remove the attached four screws easily. Before you finally remove the LCD panel, unplug the wire connections first.

Sixth Step. Finally install your new LCD panel. This is another laptop part you have to handle with extra care. Use a buffer before laying down the LCD panel. A towel should do the trick. Take heed of this advice. You did not buy that new item only to ruin it.

Seventh Step. Do the steps one to five in a reversed manner. A simple common sense should tell you what to do.

Let me discuss the details anyway for laptop LCD replacement. First is to reattach the four screws that you removed during step five. Then reattach the metal frame. The next part to reattach is the lid over the frame. Then reattach the 14 screws that you released in step four. Now work on those bezels. Let me remind you once again that they are delicate and must be handled with extra care.

Now test try your laptop and celebrate all the benefits of doing laptop LCD repairs yourself. You get to save a lot of money and frustrations from dealing with sometimes impertinent technicians. And of course there is the prized benefit in the form of a sense of accomplishment.

Be careful not to turn the whole thing into a false economy. Be very careful in handling the delicate parts and be very meticulous with the instructions. You don't want to turn a simple problem of LCD defect into a laptop overhaul. Remember that you intend to save money, not waste some.

How To Replace Laptop |